40
These connections include:
• AC connection terminal
• DC connection terminal
• External Ground Fault Interrupt fuse
Review the following figure for the terminal locations.
The inverter is connected to the electrical grid using three wires: Line 1,
Line 2 and GEC.
Figure 7-1 Connections between the Inverter and Integrated AC/DC Disconnect
7.2 Removing the Inverter
1. Disconnect the AC and DC conductors, including the GEC at the
grounding lug, inside the inverter.
2. Pull all conductors down through the appropriate fitting to the wiring
raceway inside the disconnect.
3. Remove the locking nuts on the conduit fittings between the inverter
and the disconnect units.
4. Remove the three mounting screws in the lower section of the inverter
assembly to detach the inverter from the mounting bracket.
5. Lift the inverter from the mounting bracket.
6. Replace the lid on the inverter.
AC/DC Disconnect Grounding Lug
Knockout for DC
Inverter
Grounding Lug
DC Conductor
Connections
AC Conductor
Connections
AC Conductor
Connections
Knockout for
Data Comm
DC Conductor
Connections
Dividers
Knockout for AC
