‘FunKlock’
Issue 5 (14 November 2019)
www.pvelectronics.co.uk
- 21 -
Setting the Time:
From time display mode, press and hold ‘SET’ button for 2 seconds until
the seconds digits are displayed
Press the ‘ADJ’ button to reset seconds to zero.
Briefly Press ‘SET’ again and the minutes will be highlighted
Press the ‘ADJ’ button to set the minutes.
Briefly Press ‘SET’ again and the hours will be highlighted.
Press the ‘ADJ’ button to set the hours.
Finally, briefly Press ‘SET’ again to revert to normal clock operation.
Night Blanking Override:
During programmed night blanking, the blanking may be overridden to
see the time by briefly pressing the ‘SET’ button. Tubes will remain lit for
the period defined in parameter (15).