3
Step 1 Installing the Wall Mount
1. Use the wall mount (A) as a template to mark the installation holes. Use the bubble level (C) to ensure the
wall mount (A) is level.
2. Use a 3/8 in. (10mm) drill to slowly drill 2.4 in. (60mm) pilot holes.
3. Insert anchors (W-B) into the holes. Ensure the anchors are completely flush to the concrete surface even if
covered by a layer of joint compound or other material.
4. Attach the wall mount (A) to the wall using the lag bolts (W-A) and lag bolt washers (W-C).
CAUTION:
Ensure the wall you select is a
weight-bearing wall. Failure to observe this
precaution can result in serious physical
injury and/or property damage. Consult a
professional installer or contact customer
service if you have any questions.
CAUTION:
Avoid drilling near electrical
wiring and water pipes.
CAUTION:
Do not drill into mortar between
bricks or into loose concrete.
CAUTION:
Never drill into hollow bricks.
