7
4.
Installation of the water supply
4.1
Shut off the water supply.
4.2
Release the flex tube of your faucet in the cold water and screw the 3-way inlet valve to the water pipe.
4.3
Ensure a correct fit of the washers.
5.
Install the ball valve to the reverse osmosis system.
5.1
Wrap Teflon tape around the male thread of the
ball valve and screw it into the 3-way inlet valve
.
5.2
Take the 3/8“
tube and carefully cut it to the
desired length with the cutter.
Make sure that
you do not squeeze the tube end when cutting
because it can lead to leaks.
5.3
Guide the union nut over one end of the
3/8“tube, push the tube over the
broadening on
the ball valve and fasten the union nut
.
Ball valve
Screw nut
Connection faucet
Washer
3-way inlet valve
Ball valve
Washer
Inlet water valve
3-way inlet valve
Ball valve
Teflon tape