manualshive.com logo in svg

PURSUIT OS 315, Owner'S Manual

Share
Download
PURSUIT OS 315 Owner'S Manual Download Page 36

    OS 315

36

4.3  12-Volt DC Panels

HELM SWITCH PANELS

The following are descriptions of the components con-
trolled by the helm switches:

HELM PANEL LEFT

Horn
Activates the boat horn.

Nav /Anc.
Pressing the top of the rocker switch activates the navigation lights.  Pressing the bottom, activates the anchor
light.

Washer:
Activates the washer fluid for the windshield.

Cockpit
Activates the lights that illuminate the cockpit area.

Fresh Water
Activates the fresh water pump.

Power Steering (Optional)
Activates the optional power steering feature.

Fwd Bilge
Depressing the switch will activate the manual pump.  If the automatic pump activates, the automatic bilge
pump indicator on the helm will light.

Aft Bilge
Depressing the switch will activate the manual pump.  If the automatic pump activates, the automatic bilge
pump indicator on the helm will light.

Port Wiper
Activates the port wiper.

Stbd. Wiper
Activates the starboard wiper.

Open/Close
Pressing the rocker switch opens and closes the windshield vent.  Refer to the Windshield Ventilation section
of the Ventilation System chapter.

Deploy/Retrieve
Pressing the rocker switch  drops (deploys) and retrieves the anchor.  Please refer to the Windlass Section in
the Exterior Equipment chapter.

Helm Panel (Left)

Summary of Contents for OS 315

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands