PURSUIT 2670 Denali, Owner'S Manual

Page: 110 / 154

2670 DENALI
Proper storage is very important to prevent serious damage to the boat. If the boat is to be stored
indoors, make sure the building has enough ventilation. It is very important that there is enough
ventilation both inside the boat and around the boat.
14.3 Recommissioning
DO NOT OPERATE THE BOAT UNLESS IT IS COMPLETELY ASSEMBLED. KEEP
ALL FASTENERS TIGHT. KEEP ADJUSTMENTS ACCORDING TO SPECIFICA-
TIONS.
Note: It is important and recommended that the fitting out procedure for the marine gear
be done by a qualified service person. Read the engine owner’s manual for the
recommended procedure.
BEFORE LAUNCHING THE BOAT, MAKE SURE THE DRAIN PLUG IS INSTALLED.
Reactivating The Boat After Storage:
• Charge and install the batteries.
• Install the drain plug in the hull.
• Check the engine for damage and follow the manufacturer’s instructions for recommissioning.
• Check the engine mounting bolts to make sure they are tight.
• Perform all routine maintenance.
• Check all hose clamps for tightness.
• Pump the antifreeze from the fresh and raw water systems and flush several times with
freshwater.
• Check and lubricate the steering system.
• Clean and wash the boat.
14-6