OPERATING INSTRUCTIONS
cont.....
amount the Release
11. Insert the Hex Key into one Grub Screw at a time and turn it anti-clockwise suf-
12. Fit either the 150mm, 100mm or both Extension Pieces over the Collar and tighten
the Grub Screws to secure it.
13. Fit the appropriate Head Adapter over the Extension Piece and tighten the Grub
Screws to secure it.
14. Repeat steps 8 and 9.
15. Place a vehicle support stand at an appropriate spot under the chassis of the
vehicle suitable for resting and securing the vehicle and then lower the vehicle by
gently turning the Release Valve on the
Kojack
anti-clockwise until the vehicle
16. Remove the
Kojack
TO LOWER:
17. Position the
Kojack
as per the set up used to raise the vehicle, under the ball
socket or square mount on the vehicle.
18. Repeat Steps 8 and 9.
19. Remove the vehicle support stand.
20. Insert the Jack Handle into the Release Valve of the
Kojack
and gently turn
anti-clockwise to lower the vehicle.
21. Remove the
Kojack
.
AFTER USE AND STORAGE:
•
Remove the Ball or Square Head Adapter, Extension/s and Collar.
•
Ensure the Cap and threaded section is secured in the Hydraulic Ram by turning
it clockwise until it will turn no more.
•
Ensure the Hydraulic Ram is secure in the
Kojack
by pushing it down as far
as it will go. (If you have not already opened the Release Valve you will need to
do this to lower the Hydraulic Ram)
•
Store the
Kojack
and its Components upright in a dry environment to prevent the
components from rusting.
•
Store the
Kojack
and its components in a safe place inaccessible to children.
MANUAL Hydra Jack - RV Jacking Kit 4000kgs.indd 6
29/08/2013 10:45:39 AM
Valve is turned).
is rested on the vehicle support stand.
KoJack-HydraulicJack-8pp.ai 6
8/08/14 10:31 AM
