30
31
SYNCING TWO BASES (OPTIONAL)
A Sync Cord is included with the Twin XL base. Not available
on Queen, King, or Cal King size bases. The Sync Cord con-
nects the two control boxes to a single remote for the synchro-
nization of two bases. This process is most commonly used for
syncing two connected Twin XL bases.
Unplug bases from power source.
Plug the male ends of the sync cord into
the matching female connectors of each
Twin XL base that are plugged into
their own respective control box. Now
connect the USB Cords to the female
ends of the sync cord.
Plug bases back into the power source.
The light under the bed will begin to
flash, indicating that it is in pairing
mode.
Press and hold down the PAIR button
on the back of the remote. The button
will flash to indicate the pairing is
completed. The PAIR button will stop
flashing and the underbed light will
turn off. The remote control can now
operate the base normally.
1
2
3
4
SYNCING TWO BASES (OPTIONAL)
Purple has partnered with Ergomotion on this amazing product.
For technical or warranty support please contact Ergomotion at
1-888-550-3746.
USB
USB
Y-Cord
Y-Cord
Sync Cord
Control
Box 1
Control
Box 2
On either one of the remote controls,
press and hold all four buttons (Head
Up & Down, Foot Up & Down) until
the light of the buttons on the remote
flash quickly. The AB is set successful-
ly. At this time, you can toggle the AB
button on the back cover to control the
TL bases separately.
NOTE: This step is optional and only
necessary if you wish to control the two
bases independently.
5
