Purmo LVI TTW 120 W, User Manual

Page: 23 / 36

23 INSTALLATION AND USER MANUAL OF TTW THERMOSTAT
3. Connection – Electricity
3.1 THE ELECTRICAL INSTALLATION FOR MUST COMPLY WITH LOCAL OR NATIONAL REGULATIONS. TTW L (HIDDEN CONNECTION)
MUST BE INSTALLED BY A COMPETENT ELECTRICIAN.
• While connecting the towel warmer to electric installation ensure that the curcuit has a 30mA residual-current circuit breaker and
a appropriate overcurrent circuit breaker.
• Follow the subsequent guidelines when connecting the electrical installation of TTW L (hidden connection):
• a. L - Phase.
• b. N - Neutral
• c. - Earth
• For detailed installation instructions - see the last pages of this manual
3.2 NOTES PRIOR TO REMOVAL:
• Disconnect the device from electric circuit and ensure that the towel warmer has cooled down before you start disassembling the
towel warmer.
• Release the screw at the back of the controller casing.
• Take off the controller from the heating element.
• For disassembling the heating rod use a spanner no 24.
NOTE! Be careful — electric only towel warmer filled with heating liquid may be heavy. Ensure all necessary safety measures.