5.
Power light.
2
1
3
4
5
Power knob :
0---- STOP
---- Fan only
I----- 750 W (low speed)
II----1500 W (high speed)
Thermostat knob :
Gauche (-) : STOP
Droite (+) : Maximum
OPERATION :
1.
Carefully remove your heater from the box and
bag.
2.
Make sure that the heater is in the OFF (0)
position before plugging the heater into a outlet.
3.
Place the heater on a firm, level surface.
4.
The power light will light up when initially
plugging the heater into a outlet.
5.
For heater operation, set the Thermostat knob to
the maximum setting (+).
6.
Set Power knob to the desired heat setting. Low
heat (750W) is represented by the I and High heat
(1500W) by the II.
7.
For fan-only operation, without any heat output,
turn Power knob to the fan setting represented by
.
8.
The Power light will remain lit during operation.
9.
To disconnect heater, turn Power knob to the OFF
(0) operation. Then remove the plug from the
outlet.
WARNING : METAL MESH IS HOT WHEN
HEATER IS IN OPERATION.
Thermostat instruction :