Puris RXH999, Manual

Page: 88 / 92

EN
26
⚫
Clean the engine regularly and keep the cooling system clean to allow air
circulation, which is essential for the duration and operation of the engine. Make
sure there is no dirt, lawn and fuel leftovers in the exhaust.
The bottom of the machine should be cleaned after each use to prevent the collection of
cut lawn, leaves, soil or other debris. If it accumulates, it will cause rust and the
performance of the machine will be affected.
⚫
Disconnect the spark plug sheet.
⚫
Empty the fuel from the tank.
⚫
Turn the car upside down and support it on the case. Keep the part with the air filter
up. Secure the car well.
⚫
Clean the bottom of the machine with the right tools.
⚫
Use only the original replacement spark plugs. For optimal results, replace the
spark plugs every 100 hours of use, close the gap once a season.
⚫
Lubricate ball bearings on each wheel at least once a season.
12. STORAGE AND TRANSPORT
Storage
Follow the next steps to prepare the scarifier of lawn for storage.
1. Empty the tank.
a) Empty the gas tank with a suction pump.
Precaution! Do not empty gasoline in closed rooms in the immediate vicinity of open fire
etc. Don't smoke! Gasoline fumes can cause explosions or fires.
b) Start the engine and let it run until it has used all the fuel in the carburetor.
c) Remove the spark plug. Use an oil to pour about 5 ml of oil into the
combustion chamber. Operate the starter to evenly distribute the oil in the combustion
chamber. Remove the spark plug.
2. Clean and grease the machine carefully.
3. Gently grease the cutter to avoid corrosion.
4. Store the scarifier of lawn in a dry place , clean and protected frost, without the
access of unauthorized persons..
Precaution! The engine must be completely cooled before storing the
machine.
Transport
Danger!
Always stop the engine before transport and allow to cool. Disconnect the
spark plug. The appliance must not be tilted when transported.
Empty the fuel tank before transporting the unit.