EN
22
Replace roll only with a roll original, as this will ensure top performance and safety in
all conditions.
To change the scaling roller or aeration roller, which is available as an option, do the
following.
1.
Allow the engine to cool.
2.
Remove the spark plug.
3.
Remove the collector bag.
Note:
Do not lift too much, the fuel may flow from the tank, if necessary, to
empty the fuel before changing the roller.
Remove the roll
1.
Remove the four screws. (Fig.11B)
2.
Lift the roller and shoot in the direction of the arrow. (Fig.11C)
Assemble the roll
1. Slide the new roller in the direction of the arrow, insert the shaft into the hexagonal
location and press the other side into the holder (Fig.11C / Fig.11D / Fig.11E).
2. Refix the roll with the two screws.
3. Check that the roller is placed correctly.
4. Assemble the aerator shaft as well as the scarifier shaft. (Fig.11F / Fig.11G / Fig.11H).
Summary of Contents for RXH999
