background image

User Manual

 

PT-SP-HD28DA 

 

 

 
Preface 

Read this user manual carefully before using this product. Pictures shown in this 
manual are for reference only. Different model layouts and specifications are subject 
to the physical product. 
This manual is for operation instructions only, not for any maintenance usage. 

In the constant effort to improve our product, we reserve the right to make changes in 
functions or parameters without prior notice or obligation. 
 

Trademarks 

Product model and logo are trademarks. Any other trademarks mentioned in this 
manual are acknowledged as the properties of the trademark owner. No part of this 
publication may be copied or reproduced without the prior written consent. 
 

FCC Statement 

This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. It has been tested and found to comply with 
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful interference in 
a commercial installation. 

Operation of this equipment in a residential area is likely to cause interference, in 
which case the user at their own expense will be required to take whatever measures 
may be necessary to correct the interference. 

Any changes or modifications not expressly approved by the manufacture would void 
the user’s authority to operate the equipment. 

 

 

 

Summary of Contents for PT-SP-HD28DA





















Reviews: