User Manual
PT-MA-HD42UHD
7
5.
Button Control
5.1
Manual Switching
When the switcher is in manual switching mode, the
AUTO
button LED goes out.
Please follow the below steps to switch input source to output channel.
1)
Press
Select
button at
Out A
block to select input source for output A, and the
corresponding source LED turns green.
2)
Press
Select
button at
Out B
block to select input source for output B, and the
corresponding source LED turns green.
5.2
Auto Switching
Press and hold
Select
button at least 3 seconds at
Out A
block to enable auto
switching mode for output A, and then the
Auto
LED will turns green.
Press and hold
Select
button at least 3 seconds at
Out B
block to enable auto
switching mode for output B, and then the
Auto
LED will turns green.
When in auto switching mode, the switcher will switch according to the following
rules:
The switcher will switch to the first available active input starting at input 1 to 4.
New input: The switcher will automatically select the new input once detecting a
new input.
Reboot: If power is restored to the switcher, it will automatically reconnect the input
before powered off.
Source removed: When an active source is removed, the switcher will switch to the
first available active input starting at HDMI input 1.
Detection method: TMDS or 5V (The default is 5V and it can be selected by RS232
commands).
Press the
Select
button can switch to next input source, and the switcher doesn’t exit
the auto switching mode.
Note:
In auto switching mode, press and hold the
Select
button at least 3 seconds to
enable manual switching mode, but the input source will not be switched.
