User Manual
PT-HDBT-701-TXWP
7
Installation
①
If installing in a back-box, it is recommended that the PT-HDBT-701-TXWP be
installed in a suitable square box. The square box has sufficient space to
terminate the cables with jacks behind the unit when fully installed.
②
Run one Cat5e/6/7 cable from the PT-HDBT-701-TXWP location to the location
where the HDBaseT Receiver/ Matrix Switcher will be located (somewhere near
the display device).See the installation instructions for the 70M HDBaseT
Receiver.
③
If using the Control Panel, run another twisted pair cable from the PT-HDBT-701-
TXWP location to the location that the Control Panel will be mounted.
④
All Cat5e/6/7 cables should be terminated with jacks. This allows the permanent
link between the two devices to be tested.
⑤
Use the appropriate category rated patch cable to connect the HDBaseT link to
the HDBT OUT connector.
⑥
If using the Control Panel, use the supplied adapter cable to connect with the
second cable and follow the installation instructions for the HDBaseT Receiver
and Control Panel.
Note:
We recommends Cat5e/6/7 cabling with alien crosstalk prevention technology for
the performance of HDBaseT link.
Summary of Contents for PT-HDBT-701-TXWP
Page 27: ...User Manual PT HDBT 701 TXWP ...
