Battery Installation
Open the battery compartment by
using the finger nail notch on the
edge of the battery tray as shown
in fig. 1.
Remove the used battery if
present.
Pull off the protective sticker on the
new battery using the tab provided
and wait a few seconds for air to
enter and begin to activate.
Insert the new battery of the
appropriate type ensuring that
the negative (shouldered) contact
is pointing downward, with the
positive (flat) contact is uppermost.
Close the battery compartment
until a distinct click is felt/heard.
Your hearing system is now ready
for use.
1)
2)
3)
(Model shown in diagrams for illustrative purposes only. Actual model may vary from that shown).
9
