background image

8

 

Installation & Operation Manual

Copyright © Puretec Ltd 2020

 Warranty

Notes 

Puretec water care products are designed, manufactured and supported by Puretec Pty Ltd 
the name you can trust for viable and proven water solutions. The complete range of Puretec 

products are developed, refined, made to meet and exceed stringent specifications for the 

worldwide market.

Important: Sales of products are subject to our Terms and Conditions which are available 

upon request. All specifications, information and photos are a guide only and are subject to 
change without notice. Please ring to confirm details. Warning: For correct operation of this 

appliance it is essential to observe manufacturer’s instructions.

Warranty

Any claim under this warranty must be made within 10 years of the date of purchase of the 
product. This product is warranted to be free of defect of material and workmanship for 10 
years from date of purchase. 10 year warranty is 1 year parts and labour plus 9 years parts 
only. Excludes cartridges.

To make a claim under the warranty, take the product and proof of purchase to place where 
you purchased the product, and they will lodge a Warranty Request with Puretec.

Puretec will pay your reasonable, direct expenses of claiming under this warranty. You may 
submit details and proof of your expense claim to place of purchase for consideration.

The warranty only applies if the product was used and/or installed in accordance with the 
user guide and/or installation instructions. This warranty is given in lieu of all other express 

or implied warranties and manufacturer shall in no circumstance be held liable for damages 
consequential or otherwise or delays caused or faulty manufacturing except as excluded by 
law.

Applicable to all above, is that the warranties need to be approved by Puretec to ensure 
product was not incorrectly used, installed or claimed. False and incorrect claims will be 
pursued at Puretec’s discretion, including chargeable inspection and labour costs incurred.

Summary of Contents for Z1-RW-K













Reviews: