9
Reverse Osmosis Undersink Water Filter Systems
Quick Connect Fittings
Figure 3 - SmartTee™ Quick Connect Fitting
2. Cut the tube square and push into into the tube stop
(inside the collet). For metal tube; remove burrs and
chamfer tube end to prevent O-ring seal being damaged.
6. Push the collet against the quick connect nut and slide
tube out of fitting.
3. The fitting grips before it seals. Ensure the tube is
pushed all the way into the tube stop.
4. Once the tube is secured in position, turn the quick
connect nut clockwise to secure.
Note:
Hand tighten only. Do not overtighten.
1. Turn the quick connect nut on the SmartTee
™
anticlockwise to release the collet.
5. Turn the quick connect nut on the SmartTee
™
anticlockwise to release the collet.
DISCONNECTION PROCEDURE
