3
Reverse Osmosis Undersink Water Filter Systems
Introduction
Puretec Customer Service
Thank you for purchasing Puretec drinking water filter system. Your system is a proven
performer manufactured from only quality materials and components and will give years of
‘spring fresh’ water free of impurities if maintained properly.
The Puretec RO series system cartridges need replacing regularly to maintain optimum
performance. This is a simple procedure when following instructions. For cartridge replacements
contact your nearest Puretec stockist.
The system is designed for metropolitan supply water but can be used in other situations.
For other types of water supply please contact your local Puretec stockist or call our Puretec
Customer Service Help line prior to installing the tap.
Customer Service Help line
1300 140 140
(Australia)
0800 130 140
(New Zealand).
Operation
The Puretec RO series system is designed to run economically for many years, dependent on the
initial installation and periodical maintenance.
Flush systems for 10 minutes after any period of non-use more than 2 days. For a period of
non-use of 2 weeks or more, it may be necessary to replace cartridge.
Chrome Plated Surface - should only be cleaned with liquid detergent or soap and water. Under
no circumstance should any abrasive or acid based cleaning agents be used.
Installation Note:
A water filter system/tap, like any product, has a limited life and may
eventually fail. Also sometimes failure happens early due to unforeseen circumstances. To
avoid possible property damage, this product should be regularly examined for leakage and/
or deterioration and replaced when necessary. A drain pan, plumbed to an appropriate drain or
outfitted with a leak detector, should be used in those applications where any leakage could
cause property damage, and/or the water supply should be turned off if no one is home/present.
Cartridge Replacement
To maintain the high quality of the purified water, the cartridge needs changing every 6 months
(dependent on water quality and usage).
When replacing cartridge, ensure you reset the LED reminder light by removing/replacing the
battery from the rubber seat. Please refer to page 8 for a detailed diagram.
Order
MC051
&
CB951
for a replacement cartridges and
RET1812-75
for replacement
membrane to suit your RO270 system.
