3
High Flow Inline Water Filter Systems
Operation
The Puretec PureMix Inline Water Filter System is designed to run economically for many
years, dependent on the initial installation and periodical maintenance.
Flush systems for 10 minutes after any period of non-use more than 2 days.
The
PureMix Z6
Inline Water Filter System is designed to operate with mains water.
The
PureMix Z7
Inline Water Filter System is designed to operate with mains, rain, harsh
and rural water.
Cartridge Replacement
To maintain the high quality of the purified water the cartridges need changing every 6 -
12 months, dependent on water quality and usage.
You can obtain replacement cartridges from your local Puretec dealer. To maintain
performance standards and warranty, use only genuine Puretec replacements.
Replacement cartridge code for
Z6
model: Puretec
Z6-R
.
Replacement cartridge code for
Z7
model: Puretec
Z7-R
.
Installation
This system comes complete with an installation kit enabling it to be connected to 15mm
(½”) male thread to an existing tap or mixer tap (cold supply only - hot water should be
filtered prior to heating). Also includes extending kit, where extra length is required.
Installation Requirements
1. 15mm (½”) cold water flexi-connector to tap.
2. Water supply pressure: 200 - 689 kPa.
3. Water supply temperature: 0° - 38 °C (protect from freezing).
Alternative fittings may be required if being connected to anything other than 15 mm (½”)
copper pipe. No electrical or drainage requirements.
Operation
