Troubleshooting
LEAKS
l. Check the 0-ring for dirt, cuts, or swelling.
Replace 0-ring if necessary.
2. Make sure housing is closed properly. Hand-tighten securely. Do not over-tighten.
3. Check all threaded connections and rethread as needed.
4. Check to see if the filter bag is dirty and blinded over.
(See WARNING under Bag Replacement) If this is the case, replace bag according to
instructions.
POOR FILTRATION RESULTS
l. Check to make sure the filter bag is properly seated in the support basket. (See WARNING
under Bag Replacement) The bag should extend fully to the bottom of the basket and the top
should overlap the sealing collar.
2. Check for rips or tears in the filter bag.
NOTES
FPS designs, manufactures and supports Puretec water care products, the name you can trust for
viable and proven water solutions. All pictures and information are supplied as a guide only.
The complete range of Puretec products are developed, refined and made to meet and exceed stringent
specifications for the worldwide market.
Important Note: Sales of products are subject to our Terms & Conditions which are available upon
request. All specifications, prices and photos are a guide only and are subject to change without
notice. Please ring to confirm details. Do not use products with microbiological unsafe water without
adequate disinfection. Where water pressur eexceeds maximum pressure specifications, a pressure
limiting valve must be fitted. Maximum flow depends on cartridge, vessel, pressure, impurities etc.
BAG FILTER SYSTEM
USER GUIDE
