background image

Filtaflo Customer Service

Puretec Customer Service

Thank you for purchasing a Puretec Bag Filter System. Your system is a patented, proven 
performer manufactured from only quality materials and components and will give years of 
clean, fresh, invigorating shower water free of impurities if maintained properly.

Caution: Do not use with water that is microbiologically unsafe or with water of unknown 
quality without adequate disinfection before or after the system.

The system is designed for metropolitan supply water but can be used in other situations. For 
other types of water supply please contact your local Puretec stockist. 

The Puretec Bag Filter System cartridge needs replacing regularly to maintain optimum 
performance. This is a simple procedure when following instructions. For cartridge replacements 
contact your stockist.

Precautions

WARNING

: For drinking water applications, do not use with water that is microbiologically 

unsafe or of unknown quality without adequate disinfection before or after the system.

CAUTION

: Filter must be protected against freezing (when used with aqueous solutions), which 

can cause cracking of the filter and water leakage.

CAUTION

: Because of the product’s limited service life and to prevent costly repairs or possible 

water damage, we strongly recommend that the bottom of all plastic housings be replaced every 
ten years. If the bottom of your housing has been in use for longer than this period, it should be 
replaced immediately. Date the bottom of any new or replacement housing to indicate the next 
recommended replacement date.

Notes

•   Make certain that installation complies with all state and local laws and regulations.

•   Do not use wicking or sealer for fitting connections into the cap of the filter. Teflon® tape is 

recommended for this purpose.

•   Do not install where system will be exposed to direct sunlight.

•  Allow a minimum of 3 inches clearance under the filter or optional sump stand to facilitate 

filter changes.

BAG FILTER SYSTEM

Copyright © Fluid Products Pty Ltd 2012

2

BAG FILTER SYSTEM

USER GUIDE

Summary of Contents for MPB202









Reviews: