Puretec ESR2 Series, User Manual

Page: 11 / 24

11 Undersink UV Filter System with Tripla ™ LED Mixer Tap
Filter System Installation
This system comes complete with an installation kit enabling it to be connected to 15mm
(½”) male thread.
Installation Procedure
1. Before attempting installation, check all components are intact and have not been
damaged in transit.
2. Locate a suitable position for the system remembering to allow 50 mm under the
unit and 350 mm clearance to the side of the unit for lamp changes. A power outlet is
required.
3. I
solate
water supply and cut copper pipe ready to install the SmartTee ™ .
4. Connect the Smart Tee to a piece of white tubing (see Fig. 7 SmartTee ™ Quick Connect
Fitting ). Allow slack in tubing.
Replacement Guide
• Install the filter housing assembly by positioning it in the desired location, marking the
position of fixing holes and fixing with mounting screws. Allow room for the connecting
tubes and for removing the filter bowls (50 mm).
Replacement Guide
To maintain the high quality of the purified water the cartridges need changing every 6 - 12
months (this is dependant on water quality and usage).
You can obtain replacement cartridges and/or lamp from your local Puretec dealer and to
maintain performance and warranty use genuine Puretec replacements.
Replacement Parts:
ESR2
A) Sediment Cartridge PL051
B) Taste & Odour Cartridge MC011-S
C) UV Lamp RL2
Quartz Sleeve RQS2
Replace cartridges every 6 - 12 months. Replace lamp every
12 months.
A
B
C