Control panel has preset IP-address 192.168.10.11. Automatic device search procedure for each interface
will try to change IP-address to IP-address of 192.168.10.X subnet to check facility of access to control
panel.
If control panel is not found IP-address of interface will return to initial setting and search will be repeated
on next network card. When device with 192.168.10.11 address is found, search will be stopped.
Note that automatic search procedure can disrupt local network operation since IP-address of your
network card is changed. Therefore, use this function only if you do not use local network resources and
Internet on this PC. Press “Install”. Wizard will copy necessary files and accomplish its operation.
Fig. 4. Automatic setting of network
3. Start MACH3 and enter Config->Config Plugins menu.
In opened window (fig.5) turn on PLPendant Purelogic RnD plug-in and restart MACH3.
Fig. 5. Automatic setting of network
-4-
