VIP-300H USER MANUAL
VERSION 1.0
Video
The VIP300H-U TX accepts HDMI 1.4b video formats.
The VIP300H-U RX incorporates a single HDMI output
Please see Appendix C: HDMI 1.4b
Infrared
RS232
Video functions
RX Scaler settings
The VIP300H-U provides three modes of scaler output:
•
Pass through – overrides scaler reformatting and provides the same signal as found at the
connected transmitter, providing it is within product’s signal specifications.
•
1080P – converts all compatible signals to 1080P60 output
•
4K30 – converts all compatible signals to 4K30 output
The scaler settings are accessible from the built in web page of the RX, under the ‘Functions’ tab. The
scaler settings are also accessible from the VPX Device Management page.
Changes to the scaler settings will require a reboot of the RX.
Video wall settings
The VIP300H-U supports up to an 8x8 video wall configuration.
The video wall settings are available from the built in web page of the RX. The video wall functions are
also accessible from the VPX Device Management page. VPX provides automated setup of each receiver
in a videowall array, making configuration easy and quick.
Video Wall Reconfiguration
It is possible with external control automation and VPX+ to reconfigure receivers to different image
zones dynamically. This allows you to change the layout of a video wall. Examples are shown in
Appendix XX: Video Wall Configurations
