User Manual
PT-E-HD50
Receiving unit PT-E-HD50 RX
Front Panel
Rear Panel
12. SIGNAL IN:
Plug in a Cat-5/5e/6 cable that needs to be linked to the transmitting unit TX.
13. LED:
TX /RX link indicator
14. Ethernet port for LAN:
Connect to network device
15. DIP Switch:
PIN#1: Setup the RS-232 mode for serial communication channel.
PIN#2: For Firmware Update
16. RS-232:
Connect to serial port device with a DSUB-9 male-male or male-female cable here F/W update for
Valens.
17. IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR blaster
18. IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR receiver
19. HDMI OUT:
Connects to a HDMI source with a HDMI male-male cable
20. Mini-USB:
F/W update
21. LED:
Power indicator
22. +24V DC:
Connect to a 24V DC power supply.
7
12
13
14
15
16
17
18
19
20
21
22
DIP Switch Position
TX & RX
Description
PIN#1
ON [
]
TxD: The 2nd pin of RS-232, which is in charge of sending data
RxD: The 3rd pin of RS-232, which is in charge of receiving data
OFF [
]
TxD: The 3rd pin of RS-232, which is in charge of sending data
RxD: The 2nd pin of RS-232, which is in charge of receiving dat
PIN#2
ON [
]
Firmware Update mode
OFF [
]
Normal
* DIP Switch Position (TX/RX)
