PureLink by Dtrovision
87
“!” is found at the end of a command code which tells the system to execute the
command.
For example, the command code
*255AFO01!
can be interpreted as follows: (*) Starting the command code (255) Router ID is 255
(AF) request Audio volume information on (O01) Output 01(!) take the command. For a
complete list of command characters and their functions, see examples below.
Examples:
Command Codes
Action
*255AFO01!
Check Audio Matrix Router Output 1 Audio volume
information
*255AFALLIO!
Check Audio Matrix Router's all Output volume
information
Router ID Check
User can confirm the Router’s Current ID setting.
Universal Router ID is 999
Example:
Command Codes
Action
*999I000!
Check Router’s ID
Firmware Version Check
User can confirm Router’s current firmware version.
Example:
Command Codes
Action
*999?version!
Check Router’s Firmware version
Baud Rate Setting
User can set baud rate for RS-232 command control.
Enter the Baud rate setting command below. Replace the “#”s with the Input and Output
number(s).
*255@#!
