2
*255ACI01O08,I08O02!
↵
Connect Input 1 to Output 8 and Input 8 to Output 2
*255ACI01O01,I02O02,I03O03!
↵
Connect Input 1 to Output 1, Input 2 to Output 2, and Input 3 to
Output 3
*255ACI01O01,02,03!
↵
Connect Input 1 to Output 1, 2, and 3
*255ACI01O01-07!
↵
Connect Input 1 to Output 1, 2, 3, 4, 5, 6, and 7
4.3 Disconnecting Switches
The characters and numbers in a Disconnect command tell the system which input or output to disconnect. The
“D” key initiates a Disconnect command for routing a switch. The characters and numbers that follow the “D”
command tell the system that inputs and outputs to disconnect. The last character “!” is found at the end of the
Command code, which tells the system to execute the command. For example, the command code *255DI01O00!
↵
can be interpreted as follows: (*) Starting the command code (255) Router ID is 255 (D) Disconnect on (I01) Input
01 to (O00) Output 00 (!) take the command. For a complete list of command characters and their functions, see
page 33
.
1. Enter the Disconnect command below. Replace the “#”s with the input and output number(s).
*255DI#O#!
↵
Examples (Disconnect Video and Audio):
Command Codes
Action
*255DI01O00!
↵
Disconnect Input 1 to no Output (00)
*255DI00O03,04,05!
↵
Disconnects Outputs 3, 4, and 5
*255DI00O03-06!
↵
Disconnects output 3, 4, 5, and 6
*255DALLIO!
↵
Disconnects all inputs and outputs
Examples(Disconnect Video only):
Command Codes
Action
*255VDI01O00!
↵
Disconnect Input 1 to no Output (00)
*255VDI00O03,04,05!
↵
Disconnects Outputs 3, 4, and 5
*255VDI00O03-06!
↵
Disconnects output 3, 4, 5, and 6
*255VDALLIO!
↵
Disconnects all inputs and outputs
Examples(Disconnect Audio only):
Command Codes
Action
*255ADI01O00!
↵
Disconnect Input 1 to no Output (00)
*255ADI00O03,04,05!
↵
Disconnects Outputs 3, 4, and 5
*255ADI00O03-06!
↵
Disconnects output 3, 4, 5, and 6
*255ADALLIO!
↵
Disconnects all inputs and outputs
4.4 Connection Status Check
A connection status can be checked to confirm that the switch has been correctly executed or to confirm correct
routing to multiple outputs. The characters and numbers in a status command tell the system which input or output
to check.
1. Enter the Connection status check command below. Replace the “#”s with the input and output number(s).
