PureLink by Dtrovision
8
1-5 Operation & Installation Guide
<Front View>
1. Power Button :
Turn on/off power of the device
2. Power LED :
The LED will illuminante green when the power is on, red when it is in
'Stand by' mode.
3. IR Receiver window :
Accepts the remote control signal of this device only
<Rear View>
1. Control
- TCP/IP :
The port that links with TCP/IP controls. Connect to an active Ethernet
link with and RJ 46 terminated cable.
- RS-232 :
Connect to a PC or control system with D-sub 9-pin cable for RS-232
control.
- IR EXT :
If the panel sensor is obstructed or the unit is installed in a closed area
out of infrared line of sight, the IR RX receiver included can be inserted into the IR EXT
port at the rear to extend the IR sensor range and enable local control of the TV wall.
2. Output
- HDMI out :
Connect with HDMI TV/display for output image/video display. It is
suggest that the connection sequence should be placed as diagram showed for TV wall
set up. LOOP OUT is the nominated port for cascading the input signal.
-Audio out :
The coax and audio out to connect to the digital or analog audio
amplifier.
3. Input
- Connect to a source equipment such as DVD/Blue-ray player, PC, game console,
or USB devices to CVBS, VGA, HDMI, USB input port.
