PUREGAS, LLC
P200W Series Dehydrator User’s Guide
Page 15 of 82
P012026 – Rev. F
For Vertical / Wall Mounted Installation:
a.
Attach Mounting Brackets
to the Dehydrator with
mounting flanges facing
UP as shown.
Use
Hardware
A
and
Phillips Head Screwdriver.
NOTE
: Make sure the Mounting Brackets are attached in the forward-
most mounting position.
b.
Install the Dehydrator on a wall with the Display Panel facing UP.
(Wall mounting hardware not supplied)
NOTE
: To pre-drill a set of holes, horizontal spacing between bracket
holes is 18-3/8” on center.
6.5.4
Verify the Dehydrator is
powered
OFF
.
NOTE
:
POWER
Button will
be in the Out position and
WILL NOT
be illuminated
when power is
OFF
.
IMPORTANT!
PUREGAS recommends keeping the area beneath a vertical
mounted dehydrator clear.
