PureFlow AirDog®
AirDog® II DF-100, DF-165, & DF-200 2001-2010 Duramax Diesel
Section 7 (Continued) Wiring Harness
19
Connecting the power supply leads Continued
7-3B. Should you choose to connect the power supply leads directly to the battery, connect
the Red (+) led to the Positive (+) post of the driver’s side battery. Connect the Black (-)
lead to the Negative (-) post of the same battery.
7-4.
Route the wiring harness to the AirDog
®
and connect the 2 pin Deutsch connector to the
corresponding connector on the AirDog
®
.
NOTE:
If the Optional Indicator Light is not used, secure the pressure switch lead to the
wiring harness with a plastic tie. Also, cover the pressure sensor lead to protect it, you may
want to use it later.
Red (+)
Black (-)
Figure 34
Figure 35
