Puredry PDD 200M, User Manual

Page: 15 / 39

1.2 CODE DESCRIPTION
Set SP
Press ▲ or ▼ for 3 seconds to enter settings menu.
Once PV screen shows the code SP, SV screen shows the value,press 、▼、▲ to set the
value.
Press SET to save the value.
When the room humidity (PV) is more than the user selected (S V ), the OUT indicator
light s up , and the dehumidifier starts to operate.
When the room humidity (P V ) is less that the user selected (S V ), the OUT indicator turns
off and the dehumidifier stops operating.
ΕΝ
15
Code Price Range
SP
0~100%
P
0~9999
Hy 0.1~50.0
Sc -50.0~50.0
dp 0~1
LOCK
0~150
Description
Set the required humidity
Set P to 0
Set the hysteresis value
0: without decimal point 1: with demical point
LOCK=0,every value change in each mode allowed
LOCK=1,value change of SP(set point) allowed only
LOCK≠0,1,all value changes prohibited
Default
30
0
2.0
0
0
0
0
0
1. 3 SET
2 . DEHUMIDIFYING INDICATOR
Indicator lights up when the machine is dehumidifying.
Indicator turns off when the humidity is achieved.
3 . POWER ON INDICATOR
Indicator lights up when the machine is powered on.
4 . TURN ON/OFF
Press it to turn on/off the machine.
Indicator lights up when the machine is turned on .
Indicator turns s off when the machine is turned off.
Calibrate the reading