First Charge
*IMPORTANT*
Before putting your robot on the charger for the first time – check if the battery is completely
depleted by running the robot.
(Make sure the hard power switch on the side is set to the on
position)
Once you have verified the battery is depleted allow the robot to charge undisturbed 5-6
hours before using.
Once fully charged – Completely drain the battery through the first use before allowing the
robot to recharge.
Display Interface
Buttons
“+”
Current/preset time setting
“-”
Power switch
Cleaning mode
Start/pause
Icons Explained
Set one-time cleaning
Preset the cleaning time for a single day.
After finishing this cleaning cycle, the preset
cleaning time will be cancelled.
Continued preset cleaning time
The robot will start cleaning at the preset
time every day
Weekly Schedule
Set cleaning to specific days of the week
Machine trapped
Wheel overhanging
Power showing
Current time
Dustbin is not full
Time
Start/pause
Auto cleaning
Wall following cleaning
Spot cleaning
Auto charging
Indicates cleaning is scheduled
Set Current Time:
(Recommended – go to
“
Purecleanhome.com
”
and watch the
video
instead)
