9
Changing the Cell
1. Unplug the unit’s power cord from
the outlet.
2. Remove the Thumb Nuts and unit
from the duct.
3. Remove the two (2) screws holding
the cell on the rear of the Ballast
Housing.
4. Replace the Cell and UV Lamp and
fasten the new parts with the two
(2) screws into place.
5. Replace the Unit and the Thumb Nuts.
6. Plug the Power Cable back into
the outlet. Ensure that both the
Unit Power LED and Cell Power
LED are active.
Summary of Contents for HVAC
Page 1: ...Owner s Manual ...
Page 11: ...11 ...
Page 12: ...OM REVISION GTE pureAir_HVAC OwnersManual 200609 ...
