PureAire HVAC Owner'S Manual Download Page 10

10

Warranty Information

Your pureAir HVAC unit consists of two(2) separate products.  The housing and power supply, which protrude 
from the HVAC duct when installed, and the ARC

®

 Cell which extends into the ductwork.

Your pureAir HVAC (Product) is warranted to be free from all defects in material and workmanship in normal 
household use for a period of 

two (2) years

 from date of purchase.* 

Your ARC

®

  

Cell, including the bulb, is warranted to be free from all defects in material and workmanship in 

normal household use for a period of 

one (1) years

 from date of purchase.

The warranty is granted only to the original purchaser.  The warranty is subject to the following provisions:

Any damages or malfunctions caused by negligence, abuse, or use not in accordance with the Product 
Owner’s Manual are not covered by this warranty.  Likewise, any defects or damages caused by unauthorized 
service or the use of other than Genuine GreenTech Environmental Parts are not covered.

GreenTech Environmental will, at its option, repair or replace a defective Product or part(s) for the Product that 
is/are covered by this warranty.  As a matter of warranty policy, GreenTech Environmental will not refund the 
customer’s purchase price.

OBTAINING WARRANTY SERVICE

To obtain warranty service you must return the defective product along with proof of purchase to the 
GreenTech Environmental Authorized Service Center.  All shipping costs submitted under this Warranty shall 
be borne by purchaser. Unless this Warranty is expressly renewed or extended by GreenTech Environmental, 
any repaired or replaced part of unit shall be warranted to the original purchaser only for the length of 
the unexpired portion of the original warranty.  For the location of the nearest GreenTech Environmental 
Authorized Service Center or for other service information, please visit us online at: 

www.GreenTechEnv.com

 
Before any product is sent for service, the customer should contact the GreenTech Environmental Service 
Center to obtain a Return Merchandise Authorization (RMA) Number. This RMA Number should be clearly 
written on the box before shipping. All components/parts including the remote (if applicable), manuals, and 
original packaging should be included in the return if available.

FURTHER LIMITATIONS AND EXCLUSIONS ARE AS FOLLOWS

Any warranty that may be implied in connection with your purchase or use of the Product, including any 
warranty of merchantability or any warranty for Fitness For A Particular Purpose is limited to the duration of this 
warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitations 
may not apply to you.  

Your relief for the breach of this warranty is limited to the relief expressly provided above.  In no event shall 

GreenTech Environmental be liable for any consequential or incidental damages loss of profit, or medical 

expenses caused by any misuse, abuse, accident, negligence, or failure to follow instructions. The company 
will not be responsible for any written or oral statements made that are inconsistent with this written warranty, 
or which are misleading or inconsistent with the facts as published by the company in the literature or 

specifications.  Some states do not allow the exclusion or limitation of incidental or consequential damages, so 
the above limitation or exclusion may not apply to you. This Warranty gives you specific legal rights, and you 

may also have other rights which vary from state to state.

REGISTRATION

Please register your Product within 10 days of purchase by contacting GreenTech Environmental at:  

www.GreenTechEnv.com/Warranty

 
Registering your new pureAir product entitles you to the most up-to-date GreenTech Environmental warranty 
and promotion information.

Summary of Contents for HVAC













Reviews: