PureAire 99072 Instruction Manual Download Page 2

Page: 2 / 49

PureAire Monitoring Systems, Inc.

Welcome to PureAire Monitoring Systems

I’d like to thank you for investing in our continuous life safety and process control toxic gas

monitoring systems.

PureAire offers an unbeatable combination of experience and innovation in solving the safety

and environmental needs of our customers. We’re capable of providing small systems of a few

points to a total multi-point turnkey computerized package.

PureAire’s proprietary sensor cell technology and state-of-the-art electronics are designed to

interface with the latest distributive or PLC based control systems. We believe that our

experience, innovative products and commitment to service will satisfy your specific monitoring

needs now and in the future.

Our growth is a result of our total commitment to supporting our customers. We’re available 24

hours a day, 7 days a week to help you when you need us. Our 24 hour Emergency phone number is

847-420-3814. We can provide field service, preventative maintenance programs and training

to your technicians in the operation of our equipment. Our goal is to provide the best after sale

service and support in the industry. That’s just one way PureAire takes that extra step to

ensure your complete satisfaction.

Thank you again for investing in PureAire Monitoring Systems for your monitoring needs and

I’m proud to welcome you to our family of valued and satisfied customers.

Sincerely,

Albert A. Carrino

Summary of Contents for 99072


















































Search results

Summary of Contents for 99072

Reviews:

Related manuals for 99072

Brands by name

Popular brands

PureAire 99072, Instruction Manual

Search results

Summary of Contents for 99072

Reviews:

Related manuals for 99072

Brands by name

Popular brands