Troubleshooting
1
. Unit will not turn ON.
a. Check power connection: See if unit is plugged into a working AC outlet and the rear receptacle of the unit.
b. Check front cover: see if the unit’s front cover is in place; inner lock pin located on bottom edge of the front screen frame
should be placed in the interlock switch; front cover should be tightly shut.
c. Check if fuse is blown.
2. The unit turns ON but no air blows out: Check whether plastic wrap on main filter, VOC pre-filter and VOC post-filter has
been removed.
3. Unit is ON, but no change in speed: Call Intellipure Customer Service (further examination by trained technician).
4. Pre-filter indicator is out and Change pre-filter indicator is illuminated in red: replaceable VOC pre-filter needs to be
replaced and cleanable pre-filter needs to be cleaned.
5. Main filter indicator is out. Change main filter indicator is illuminated in red: Main filter needs to be replaced.
6. VOC post-filter indicator is out. Change VOC post-filter indicator is illuminated in red: VOC post-filter needs to be replaced.
7. DFS indicator is out and maintenance indicator is illuminated in red: DFS Technology is turned off or High Energy Grid
needs to be cleaned.
WARNING: If all suggested steps have been taken and problems persist, please contact Intellipure’s Customer Service
Department for further examination by a trained technician.
NOTE: Contact
P
ure’s Customer Service Department to order new filters
, or visit our website purespaces.com
.
10
