PURE 100/PRO, Operating Instructions Manual

Page: 26 / 32

CLEANING
BEFORE EVERY INTERNAL MAINTENANCE OPERATION, UNPLUG THE APPLIANCE.
In order to maintain the performance and efficiency of the UVGI lamp, it is important to strictly comply
with the maintenance program attached to the device. Do not use water jets or sprays for cleaning. Use a
brush to remove dust build-up on the air inlet and outlet vent at least every month. Use a soft moist cloth
to remove dust build-up on the structure.
CLEANING THE ELECTROSTATIC AIR FILTER
The electrostatic air filters are placed inside the plastic covers of the fans at the back side of the device (3
filters for the 60/PRO, 4 for the 100/PRO and 5 for the 140/PRO).
1. Remove the plastic covers by pulling them backwards.
2. Remove and wash the filters with lukewarm water.
3. When they dry off put them back and click the covers into place