Strobe Can manual.doc
4/6
First, remove the front cover and then plug the lamp into the lamp-holder. When installing, hold the
screw part of the lamp and let the slot of the lamp align the boss of the lamp-holder before plug the
lamp completely.
Note:
Never touch new lamps with your bare fingers; use a tissue or a cloth. Before removing blown
lamp, ensure that the unit is sufficiently cool.
The BH 0647 is high voltage lamp. Care should always be taken when handling these lamps. Always
read the manufacturers "Instructions for use" enclosed with the lamp.
You can use the controller PR-1388 and PR-1389 produced in our company to control many
luminaries. (The dedicated controller PR-1388 and PR-1389 are optional for the customers. For detail
about the controllers, please refer to relative “user’
s manual”)
AUDIO PLUG CONNECTING
Connecting the controller with the luminaire and the luminaire with the luminaire is the audio plug
cord. It is shown in the figure below.
AUDIO PLUG CONNECTION
2
1
1
2
FITTING THE LAMP
DEDICATED CONTROLLER MODE
Lamp Holder
Lamp
Align the Boss and Slot
