Pure Pressure Bruteless, User Manual

Page: 9 / 33

2. Bruteless Setup
Setting Up Your Bruteless Vessel
Setting up your Bruteless hash washing station is simple. A little planning and forethought will
go a very long way to ensure that your operation is set up as efficiently as possible. Before you
proceed, make sure you are fully aware of where your water source is and where you intend to
drain your waste water. Once a vessel is full of water, ice, and your material, it is can be very
difficult if not impossible to move until drained, unless using a PurePressure dolly.
There are a large variety of accessories and configurations that are possible with Bruteless hash
washers. This guide will explain first how to set up a single vessel, and then show you how to
set up a Base, Pro, or Commercial system.
Note: Ensure the work surface or
table you are using is rated for the
vessel you plan to use - a full vessel
may weigh up to 650lbs (for a full 65
gallon vessel).
8