PureLink by Dtrovision
21
Router ID Error
Indicates that the wrong ID number was entered
Command Code Ack Value Examples
Command Code
Entered
Ack Value as appears in the control
program
Explanation of Result
*999CI01O01!
*255sC I01O01 !
The command was successfully executed
*999CO01!
Command Code Error
The command was not executed because
the input number was not included
*999CI01O01
Command Code Error
The command was not executed because “!”
(End) was not included
*300CI01O01!
Router ID Error
The command was not executed because
the actual Router ID and entered Router ID
did not match
2.6 Connecting Switches
A switch is an active connection between an input (source) signal and one or more output (display)
devices. The signals connected in a switch command are either individual signals or groups of signals
coming through the connectors on the rear of the unit.
The “C” key initiates a Connect command for routing a switch. The characters and numbers that follow the “C”
command tell the system, which inputs and outputs to connec
t. The last character “!” is found at the end of a
command code which tells the system to execute the command.
For example, the command code *999CI01O01!
can be interpreted as follows: (*) Starting the command code (999) Router ID is 999 (C) Create connection on
(I01) Input 01 to (O01) Output 01 (!) take the command. For a complete list of command characters and their
functions, see examples below.
To connect a switch:
1. Enter the Connect command below. Replace the “#”s with the input and output number(s).
*999CI#O#!
Examples (Connect) :
Command Codes
Action
*999CI01O01!
Connect Input 1 to Output 1
*999CI01O04,I04O02!
Connect Input 1 to Output 4 and Input 4 to Output 2
*999CI01O01,I02O02,I03O03!
Connect Input 1 to Output 1, Input 2 to Output 2, and Input 3 to Output 3
*999CI01O01,02,03!
Connect Input 1 to Output 1, 2, and 3
