PureLink by Dtrovision
14
1 ~ 8 indicate each HDBaseT output. Connect IR receivers to the IR outputs
NOTE: Infrared receiving areas of devices can be located by shining a flashlight onto the front of the device
–
the sensor should be able to be seen through the plastic as a small, round object inside. Insert 3.5mm jacks of
IR RX receivers into RX ports, making sure the receivers themselves are placed in clear view to receive an
infrared signal from the remote handset used to control the display outputs.
1.12 Cable Termination
CATx (HDBaseT) cable
RS-232 (HTX matrix switcher)
LAN cable
RS-232 (HTX extenders)
