To the user of PURE Humidifier Co.’s Electric Humidifiers
We at PURE Humidifier Co. thank you for choosing one of our quality products. PURE Humidifier Co.
humidifiers are simple to install, operate, and maintain. However, they must be maintained to provide maximum
operating efficiency.
PLEASE READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY. PROPER OPERATION AND HUMIDITY
CONTROL IS POSSIBLE ONLY WITH PROPER INSTALLATION AND MAINTENANCE.
To ensure proper installation of this product, it must be installed by qualified HVAC and electrical contractors,
and must be in compliance with local, state, federal, and governing codes. If installed improperly this product
may cause damage to property, severe personal injury, or death as a result of electric shock, burns, and/or fire.
High chloride content in
boiler steam condensate carryover can cause chloride stress cracking and
chloride pitting in stainless components. Chloride stress corrosion cracking (CSCC) and chloride
pitting of stainless steel components is not covered by warranty. Do not use hydrochloric acid
descalers or bleach to clean the tank. Consult the factory if you are unsure about which chemical
descaler to use.
The PURE Humidifier Co. Warranty
PURE Humidifier Co. guarantees its products to be free from defects in material and workmanship for a period of
two years from the date of shipment; provided the product is properly installed, serviced, and put into the service
for which it was intended.
PURE Humidifier Co. is obligated under the terms of this warranty to the repair or replacement of the defective
part(s), excluding any labor charges, or to refund the purchase price at our option. PURE Humidifier Co.
assumes no obligation for incidental or consequential damages. The above provisions are in lieu of all other
guarantees, obligations, liabilities or warranties, expressed or implied.
Table of Contents
Introduction 1
Non-Wetting Distance Charts
2
Mounting Instructions
3
Component Identification
4
Header & Bracket Support Detail
5
Installation Tips/Controls
6
Troubleshooting 7
Maintenance 8
Introduction
