ASSEMBLY INSTRUCTIONS
STEP 1
:
Parts:
Part 1 (x2) - Base Rail
Part 2 (x2) - Base Bar
Part 3 (x1) - Handlebar Arm A
Part 4 (x1) - Handlebar Arm B
Part 5 (x1) - Backrest Arm A
Part 10 (x1) - Backrest Arm B
Part 13 (x4) - M6x40mm Bolt
Part 14 (x4) - M6 Washer
Part 15 (x4) - M6 Nut
STEP 2
:
Parts:
Part 7 (x1) - Handle Bar
Part 13 (x2) - M6x40mm Bolt
Part 14 (x2) - M6 Washer
Part 15 (x2) - M6 Nut
13
13
13
13
4
3
13
7
13
14
14
14
14
14 15
14
15
15
15
15
15
5
10
4
2
2
3
1
1
Attach both Base Rails (Part 1) and Base
Bars (Part 2) to create the bottom frame of
the seesaw.
Locate the outer openings on the Base Rail.
Install the Handlebar Arms A & B with the
hooks facing inward and facing each other
using the hardware listed.
Locate the outer openings on the other side
of the Base Rail. Install the Backrest Arms A
& B with the hooks facing inward and facing
each other using the hardware listed
NOTE: Make sure to install the bolts from the
outside, with washer and nuts on the inside
of the frame to avoid injury.
In the section of the seesaw that has the
Handlebar Arms, slide the Handle Bar
(Part 7) until all openings align. Use the
hardware listed to install.
9
MODEL#
9
33
9S
RS
