ASSEMBLY INSTRUCTIONS
PARTS & TOOLS:
(1M) Straight Bar (Male)
(1F) Straight Bar (Female)
(2) Curved Bar x2
ASSEMBLY INSTRUCTIONS:
Step 1
Connect Straight Bar (Male) (1M) by sliding in
Straight Bar (Female) (1F) and allowing push pin to
click into place.
Step 2
Attach the Curved Bar (2) to the assembled straight bar
as shown, using 2x Bolts (4), 2x Washers (6) 2x Nut Caps
Washer
Washer
Spring Washer
Spring Washer
WARNING/ADVERTENCIA
This product is to be used on a sturdy wall frame with a minimum width
of 27 .56" to a maximum width of 32. 71"and a minimum depth of 3.5" to
a maximum depth of 6.75"
.
Do not set up in a door frame out of this
range, and ensure both sides of cross bar and plastic rail lay against
door frame securely while in use at pull-up position.
Maximum Weight Capacity: 250 lbs
(3) Stop Rail
Line up holes
(4)(5) (6) (7) (8)
(4) Bolt -M6 x 66mm (x4)
(5) Nut Cap (x4)
(6)
Washer (x4)
(7)
Spring Washer (x4)
(8)
Wrench Tool
(1M)
Step 3
Attach the Stop Rail (3) to both Curved Bars (2), using
2x Bolts (4) 2x Washers (6) 2x Nut Caps (5) and 2x
Spring Washers (7). Secure the nuts using the Wrench
Tool (8)
Minimum Doorway Depth
3.5"
-(3) Stop Rail
Maximum Doorway Depth
6.75"
Nut Cap
Nut Cap
(5) and 2x Spring Washer (7) on each Curved Bar.
Secure using the Wrench Tool (8)
(2)Curved Bars
(4) Bolt
Spring Washer
Nut Cap
Spring Washer
Nut Cap
Washer
Washer
6
GQBrands.com
1-866-498-5269
