STEP 1: ASSEMBLE FRONT AND REAR STABILIZERS
Locate 4x M10 Dome Nuts (47), 4x Arc Washers (49), 4x M10x60 Bolts (46), the Front Stabilizer Bar
with Wheels (2), and the Rear Stabilizer Bar (3)
A.
Position the Front Stabilizer Bar with Wheels (2) under the Fan Wheel of the bike and align the
bolt holes to the frame.
IMPORTANT
: When aligning these holes, make sure the dimpled, square openings in the Bar are
facing down towards the ground.
B.
Attach the Stabilizer Bar to the Main Frame by inserting the bolts up through the Bar. Secure the
bolts first with the Arc Washers and then tighten the Cap Nuts down to this assembly.
C.
Position the Rear Stabilizer Bar (3) behind the Main Frame and attach this to the Main Frame as
described in Section B above.
8536DT ASSEMBLY INSTRUCTIONS
NOTE: The following instructions use the included tools:
Multi-Hex Tool, Small Allen Wrench, and Large Allen Wrench.
Please locate these and keep on hand to assemble.
Summary of Contents for 8536DT
Page 6: ...8536DT EXPLODED VIEW ...
