Troubleshooting
The speaker does not produce sound:
A
．
Check to see that power plug is properly inserted into outlet and confirm the power switch is in the
On position.
B
．
Check to make sure the audio cable is properly connected.
C
．
Check to make sure the speaker volume is at an adequate sound level.
D
．
If attempting to use the speaker in battery mode, try plugging in to a wall using the power cable to
confirm the battery does not need to be charged.
Karaoke with sharp noise, what to do?
A.
Please adjust the distance between the MCP-‐70 and the wireless microphone
B.
If attempting to use both wireless microphones simultaneously try increasing the distance between the two
microphones.
EQUIPMENT NOISE
The MCP-‐70 is equipped with a distortion prevention feature. However, in the event that unwanted noise
distortion occurs, remove any connected audio cables and reinsert them one at a time. Make sure to keep
adequate distance from each cable 2 -‐3 feet.
ANTIMAGNETIC
Keep the speaker at a safe distance from other magnetic devices to prevent unwanted distortion such as CRT
Monitors; TV’s, mobile phones etc… keeping these and other similar devices at a distance of 2-‐3 feet will prevent
such distortion from occurring.
Technical Specifications:
Specifications
Power Output: 45 Watts
Frequency Response: 40Hz-22 KHz +/- 3dB
Wireless MIC A Frequency: 202.2
Wireless MIC B Frequency: 185.15
S/N Ratio: > 70dB +/- 3dB
Driver: 8” Woofer / 4 ohms x 1
Tweeter: 3” horn
Power Source 1: DC 12V 2.6mAh
Power Source 2: AC 100-230V / 50-60Hz 35W
Product Dimensions: 17.5 X 27 X 40 Cm
In the Box:
1.
2 Wireless Microphones with Independent Frequencies
2.
1 Power Adapter
3.
1 IR Remote Control
4.
2 User manual
