Pure Acoustics MCP-70BT User Manual Download Page 4

 

 

Operating   Instructions:   

1.

 

Connect    with    Sound    Source

:   To   play   music,   connect   the   MCP-­‐70   with   sound   source   first,   via   a   RCA   

audio   cable,   insert   the   terminal   of   the   audio   cable   into   AUX   jacks,   the   other   terminal   connected   with   

sound   source   device.      While   playing   by   U-­‐disk   or   SD   card,   just   insert   U-­‐disk   into   the   USB   slot   or   SD   card   

into   the   SD   slot.      Press   SELECT   INPUT   button,   unit   will   switch   between   AUX   and   USB.   

2.

 

PLAY

:   While   playing   with   AC   220V,   place   the   POWER   button   in   the   AC   position,   make   sure   the   power   is   

connected   properly;   While   playing   with   DC12V   built-­‐in,   place   the   POWER   switch   in   the   DC   position,   

and   make   sure   AC   power   is   disconnected.   Adjust   the   volume   knobs   according   to   your   preference.      

3.

 

KARAOKE   MODE

:   Plug   the   MIC   into   the   MIC   input   port   first,   move   the   switch   on   the   MIC   to   the   on   

position,   the   unit   is   ready   to   be   used   in   karaoke   mode.   The   best   distance   between   the   device   and   the   

wireless    microphone    is    10    meters.    To    avoid    feedback    keep    the    microphone    at    least    3    meters    away   

from   the   device.   

4.

 

CHARGE

:      To   charge   you’re   MCP-­‐70,   connect   the   supplied   power   cable   into   the   unit   and   outlet   then   

place   the   power   button   in   the   OFF   position.   

   

5.

 

RECORDING

:

  

When   you   wish   to   record   an   audio   or   voice   application,   be   sure   to   insert   the   USB   or   SD   

card   properly.   Next,   connect   your   sound   source   into   the   MIC   input   port   or   AUX   port   and   then   press   &   

hold   the   REC/Play   button   for   3   seconds.   The   REC   indicator   light   illuminates   red   indicating   the   MCP-­‐70   

is   recording.   Press   the   REC/Play   button   for   1   second   to   play   back   the   recorded   content.

 

   

   

GUIDELINES   FOR   BUILT-­‐IN   BATTERY   

1.

 

Before   using   your   MCP-­‐70   the   first   time,   please   charge   the   device   for   at   least   4-­‐6   hours.   

2.

 

If   battery   power   level   is   low   during   music   play,   Low   battery   indicator   light   will   illuminate,   indicating   that   

the   unit   should   be   charged   immediately.   While   unit   is   being   charged,   green   indicator   light   will   blink,   once   

the   indicator   light   stays   on,   charging   is   complete   and   device   may   be   used   in   battery   mode.   

3.

 

When   battery   level   is   low   it   is   recommended   that   you   charge   the   device   within   24   hours,   doing   so   will   

prolong   the   life   of   the   built-­‐in   rechargeable   battery   and   prevent   the   device   from   requiring   a   longer   charge   

period   before   the   next   use.   

4.

 

Any   tampering,   changes,   adjustments   or   unauthorized   repairs   will   void   the   warranty   of   the   speaker.   All   

necessary   repairs   must   be   made   by   a   trained   &   authorized   person   only.   If   not   a   well-­‐trained   person,   it   is   

forbidden   to   dismount   the   device;   doing   so   may   cause   electric-­‐shock   injury   or   death   as   well   as   property   

damage.      

   

GUIDELINES   FOR   WIRELESS   MICROPHONE   

1.

 

Before   using   the   wireless   microphone,   please   be   sure   included   battery   are   installed.   Confirm   the   batteries   

have   sufficient   power   prior   to   each   use.   Using   the   wireless   MIC’s   without   sufficient   power   will   lead   to   a   

shorter   receiving   distance,   unwanted   feedback   and/or   distortion,   If   any   of   the   for   mentioned   issues   occur   

please   replace   the   batteries   in   the   microphones.   

2.

 

Although    the    wireless    microphones    included    will    work    in    most    situations,    for    the    best    results    use    the   

microphones   in   an   open   space   within   the   proper   proximity   with   the   speaker.   

   

   

   

   

   

Reviews: