Thank you for purchasing Pure Acoustics’ products, and welcome to the Pure Acoustics family of
satisfied customers!
Pure Acoustics was established to fulfill the need for high quality speakers of exceptional design
at an affordable price. After years of research and development, and by manufacturing all parts
ourselves - from the voice-coil to the uniquely-designed crossover - Pure Acoustics is able to offer
you speakers of superior value.
Each speaker component has been designed and engineered with first-rate materials to produce
exceptional sound. Our speakers offer the best of it all – high-quality sound, hand-made solid
construction, and a remarkably stylish appearance.
We welcome you to witness the results. Our team’s dedication to quality, reliability and attractive
design has created some of the best-value speakers you can find today.
Reading this manual fully will help you to set up your speaker properly and reward you with a fine
listening experience. Pure Acoustics distribution centers in Europe, Asia, Australia and the
Americas will be happy to assist you with any questions you may have. Please look for the distributor
nearest you on our web site, www.pure-acoustics.com.
Make sure all equipment is turned off. When connecting the speakers, be sure to retain the correct
polarity. Most speaker cables will have (+) red sign for positive and (-) black sign for negative.
Connect the speaker cable to the positive (+) front-left speaker terminal on the amplifier and to
the positive (+) terminal on the front-left speaker. Connect the speaker cable to the negative (-)
front-left speaker terminal on the amplifier and to the negative (-) terminal on the front left speaker.
Repeat the same step for the right-side front speaker. This method can be applied to bi-wire
terminals as long as the shorting straps are in place. If your amplifier is equipped with bi-wire
output connection, remove the shorting straps and connect each terminal to the associated terminal
in your amplifier.
Connect the speaker cable to the positive (+) center speaker terminal on the amplifier and to the
positive (+) terminal on the center speaker. Connect the speaker cable to the negative (-) center
speaker terminal on the amp and to the negative (-) terminal on the center speaker.
Connect the speaker cable to the positive (+) rear left speaker terminal on the amplifier and to the
positive (+) terminal on the rear-left speaker. Connect the speaker cable to the negative (-) rear-
left speaker terminal on the amplifier and to the negative (-) terminal on the rear-left speaker.
Repeat the same step for the right-side rear speaker.
Introduction
Connections
All manuals and user guides at all-guides.com
