TIMER OPERATION
SETTING UP
The outer dial should be set to the current time. Rotate the dial slowly in a clock-
wise direction, until the correct hour is aligned with the arrow printed on the dial.
Note that the outer dial is printed with the 24hr clock
8.00am = 8 on the dial, 8.00pm = 20 on the dial.
Clock hands will allow for fine adjustment of the current time setting of the dial.
DO NOT
attempt to rotate the dial in an anti-clockwise direction.
The time switch is programmed by pushing the tappets to the outer ring position
for the entire period that the load is to be turned “ON”, i.e., 15 minutes for each
tappet on the 24hr dial. When the tappet is pushed to the inside, the switch is in
the “OFF” position.
ON
OFF
Tappet Position
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
12
6
6
FIXED ON
FIXED OFF
-
TIMER
Page 15
TOGGLE SWITCH
DO NOT
push the toggle switch inwards when changing
position - this will break the inner plastic cogs.
NOTE: Timer is not covered by warranty